Book Today

 

How do you actually feel on the subject of How to Troubleshoot and Repair an Electric Water Heater?

Lots of modern-day residences make use of an electric water heater for their heater, due to its convenience and convenience of use. Nevertheless, just like any other electrical appliances, issues may emerge with its use, suddenly. It can be actually irritating to wake up to a cold shower instead of a hot one or having your bath with water that isn't warm adequate or even too hot. Whatever the case may be, water heater problems can be quite nerve-racking. Fortunately, we've made a checklist of feasible remedies to your hot water heater concerns. There are a variety of variables that could cause most of these problems, maybe an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you shut off the main power supply for security. Whatever the trouble is, getting it fixed ought to not present way too much of a problem if you follow these steps:

 

Call A Specialist:

If after changing all malfunctioning components and also resetting your temperature level, the water heater still isn't functioning, you might need to get in touch with a professional plumber for a professional point of view. The trouble with your heating system could be that the hot and cold faucets have actually been switched over or it may be undersized for the quantity of warm water required in your house. Whatever the case might be, an expert plumber would aid address the trouble.

 

Inspect Your Power Supply:

As fundamental as this might seem, it is extremely needed. Without adequate power, your water heater will not work. So the first thing to do when your water instantly retires is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the breaker stumbled. If the circuit breaker is the concern, merely transform it off and on once more. Replace any type of damaged or worn-out fuse. Check the device with power after these adjustments to see if it's currently functioning.

 

Check Your Thermostat:

If your hot water heater still isn't working or the water appearing isn't hot sufficient, you might need to inspect the temperature level settings on your top thermostat. Guarantee the circuit breaker is turned off prior to doing anything. Open up the gain access to panel and also press the red button for temperature level reset over the thermostat. This ought to help heat the water. Transform the breaker back on as well as inspect if the problem has been settled.

 

Inspect the Heating Element in the Water Heater:

If it's not a power issue, then try taking a look at your burner if it is still functioning. Check each of your heating elements to ensure the problem isn't with any one of them. If any one of them is malfunctioning, change that component and afterwards inspect whether the hot water is back on.

 

Final thought

Hot water heater troubles are not constantly significant. Most of them are due to minor concerns like a blown fuse or damaged burner. Replacing the defective parts must suffice. Nevertheless, if you are still incapable to address the issue, give a call to your nearby plumber ahead to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I'm certainly very taken with How to Troubleshoot and Repair an Electric Water Heater and I hope you enjoyed our article. In case you liked our blog posting if you please don't forget to share it. I am grateful for your time. Don't forget to check our site back soon.

Need help? Dial now.